Roll-to-Roll Screen Printing Line
Multi-function automatic Roll-to-Roll production line for all flexible rolled material,...
Read MoreAutomatic Screen Printer for Automotive Front / back Windshield
ATMATIC GS1322/W
Fully Automatic Automotive Glass Screen Printer, Automotive Glass Screen Printer, Automotive Front Windshield Glass Screen Printer, Automotive Back Windshield Glass Screen Printer
Automatic automotive front windshield, back windshield glass printing inline processing, which is productivity tool to save manpower.
Suitable for multi-layer screen printing automotive front windshield and back windshield.
Following automatic industry development to cause heavy stress of delivery, front / back windshield has heavy weight and large size, it is not suitable for manpower transport, automation is the most important issue at industry, printing back frame, bus bar and defog thermal lines for front / back windshield.
- Multi-work station design : used the design of two work station with three position, reciprocating structure for fast transport and positioning, instant to continue next action to raise production.
- Dual Shaft Servo Peel-off : double servo auto synchronous up down, auto calculation synchronous speed, digitalized preset peel-off height and start point, no sticky mesh while printing and not squeeze mesh while flood coating, able to compensate printing accuracy which is caused by mesh tension.
- Air Locking : squeegee / flood coater are locked pneumatically to facilitate quick exchange.
- Versatile Printing Cycle Mode : instant flood coating, pre flood coating, quick pre flood coating, each cycle model can be set 1 to 5 times printing to satisfy demand of different ink layer thickness
Features
- Distinct Light / Heavy Pressure Zone : assure each panel positioning and alignment to prevent breakage.
- Retractable Screen : flexible guide rail device to retract screen frame to gain wide working space for screen cleaning to save time and manpowerEquipped with cylinder lock function to assure position consistence, attains accuracy within 0.01 mm.
- Positioning Range : min 400x800 mm, max 1300x2200 mm flexible wide range for convenient process.
- Guide Rail Clamper : prevent screen frame to get stuck while sliding, convenience and smooth adjusting screen size.
- Peel-off Function : equipped with slow speed cylinder, adjustable peel-off speed and height to avoid sticky mesh after printing.
- Safety Protection : 9 sets of E-stop switch, 1 set of light barrier, 1 set of safety bar, three color warning lamp and programmed auto chain locking erroneous operating.
Specification
| Model | ATMATIC_GS1322-W |
|---|---|
| Substrate Thickness | 1.4〜12mm |
| Productivity | 300 P/H |
| Ma x Printing Area | 1300x2200mm |
| Min Printing Area | 400x800mm |
| Max Fame O/D size | 1800x2800mm |
| Min Frame O/D Size | 1200x1800mm |
| Vacuum Hole Diameter | Φ5.0mm |
| Machine Weight | 6,720kg |
| Machine Dimension | 8,400x2,300x1,760mm |
Other models in the same series but different sizes:
ATMATIC GS1220 (max printng area 1200x2000mm)ATMATIC GS1225 (max printing area 1200x2500mm)
- Related Products
Automatic Automotive Front / Back Windshield Screen Printer
ATMATIC GS1220
Suitable for screen printing on large format glass, such as door for refrigerator, automotive dormer glass, automotive front / back windshield glass, photovoltaic glass and so on.
-
Automatic Automotive Front / Back Windshield Glass Screen Printer
ATMATIC GS1225
Suitable for printing large format glass such as glass door for refrigerator, automotive dormer glass, automotive front / back windshield glass, photovoltaic glass and so on
Hot Products
Wet-film Plug-via Solder Mask
Breakthrough conventional process mode, three times printing with three times drying,...
Read More
Stop Cylinder Screen Printing Line
Screen printing speed attains highest 4000 cycles per hour within industry, under high...
Read More