Roll-to-Roll Screen Printing Line
Multi-function automatic Roll-to-Roll production line for all flexible rolled material,...
Read MorePLUGGING VIA SCREEN PRINTER
ATMA-PC VAC2529
PCB vacuum plugging via hole screen printer
This model is specialized in plug-via for multi-layer panel with high aspect ratio
This machine is specially designed to plug-via holes in multi-layer printed circuit boards with conductive or non-conductive paste. The plugging via hole can be performed with through-hole vias and blind vias with high aspect ratio, it is absolutely the best choice for PCB industry to raise production capacity.
PCB vacuum plugging via hole screen printer: multi-layer panel is the prime product of Taiwan printed circuit board overall production value. It is applied to internet communication server such as High Layer Count (HLC, upscale panel) mainly in server high efficiency calculation and cell site of 5G communication.
This model is suitable for plugging via through hole and blind hole in the advanced multi-layer PCB, and is selected plugging via process with high aspect ratio.
Features
- Overall Machinery: robust structure, stable operating.
- Digitalized Control: screen up down is driven by four-post linear actuator synchronous lifting.
- Digitalized Servo Motor: used to drive printing head transmission, stable and precision.
- Motorized Screen Micro Adjustment: screen position can be set on HMI (time for screen setup and adjustment can be saved 2.5 minutes.)
- Printing Pressure Printing: squeegee side has three cylinders (printing pressure 10 ~ 147 kg), flood coater side has two cylinders (coating pressure 10 ~ 62 kg).
- Digital constant pressure controls squeegee pressure in according to product spec thick or thin setting to attain stable printing pressure, printing time speed raises 1.5 times.
- Sub-chamber high speed evacuation technology: two seconds are required to evacuate from 1 atmospheric pressure down to 100 Pa.
- ( In feeding servo controls auto lifting the door, 1.5 seconds is required to open / close, anti-falling is designed for multiple protection, enhance operational safety.)
- Screen cleaning protection : physical button switch is equipped on machine, when operator gets in cleaning screen, manual and mono function can not be operated to attain comprehensive safety protection.
Specification
| Model | ATMA-PC VAC2529 |
|---|---|
| Substrate Thickness | 0.2 ~ 4 mm |
| Production Capacity | 60 ~ 72 P/H |
| Production Capacity 2 | Printing speed 20 mm/s, flood coating speed 400 mm/s, printing stroke 670 mm |
| Working Height | 975 + 30mm |
| Max Plugging Via Area | 630 X 730mm (25x29”) |
| Min Plugging Via Area | 250 X 250mm (10X10”)) |
| Air Source Pressure | 5 kg/cm2 |
| Power Source | 3φ220/380V，50/60Hz |
| Air Exhaustion | 10.5 kw |
| Machine Weight | 6500 kg |
| Printer CDA Air Exhaustion Amount | 35 L/min |
| Vacuum Pump CDA Air Exhaustion Amount | 23 L/min |
| Machine Dimension (not including vacuum pump( | 2315 x 2850 x 1850 mm (WxDxH) |
- Related Products
PCB Legend Inkjet Printer
ATMA-IJ 2529
PCB legend inkjet printer can be applied for legend printing to substitute conventional screen printing, screen making is no need, less manpower, energy saving, high productivity. It provides high precision, high quality and high efficiency automatic inkjet printing solution for fabricator.Inkjet printer is suitable for printing legend, IC substrate to replace conventional screen printing process. Automatic digital inkjet can provide high precision, high quality and high efficiency solution for the advanced PCB fabricators, such as Intelligent Healthcare, IoT, Internet of Vehicle, Smart Car, 5G and so on.
Hot Products
Wet-film Plug-via Solder Mask
Breakthrough conventional process mode, three times printing with three times drying,...
Read More
Stop Cylinder Screen Printing Line
Screen printing speed attains highest 4000 cycles per hour within industry, under high...
Read More